| Customization: | Available |
|---|---|
| Method: | Biological Treatment |
| Usage: | Industrial, Agriculture |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The biological rope filler is made of PP+modified alcoholized fibers as raw materials, using a mixed weaving method of elastic and soft materials. The threading adopts a snake like pattern, forming countless circular fibers to form a radial structure, increasing its surface area and suitable for the growth and reproduction of various microorganisms, so that the concentration of attached microorganisms can reach over 15000mg/l; The circumferential radial structure formed by elastic and soft materials increases the porosity of the filler, enabling good transmission of solid, liquid, and gas phases; The unique circular structure can effectively prevent excessive peeling of biofilm caused by water flow impact.
|
Model
|
Diameter (mm)
|
Specific Surface Area (m2/m3)
|
BOD Load(kg/m3d)
|
COD Load (kg/m3d)
|
N Load (kg/m3d)
|
Bioconcentration (g/L)
|
Installation Distance(mm)
|
|
60 (S2)
|
60
|
192
|
0.5-3.0 |
1.0-7.5 |
0.5-1.0 |
2.5-15 |
120-180
|
| 60 (S3) | 60 | 288 | 120-180 | ||||
| 60 (C3) | 60 | 300 | 160-240 | ||||
|
80 (S2)
|
80
|
228
|
150-200
|
||||
| 80 (S3) | 80 | 348 | |||||
| S2 is suitable for small sewage systems. S3 is suitable for the treatment of domestic sewage and industrial wastewater. C3 is suitable for ecological management of rivers and lakes. |
|||||||
1. Low aeration rate and low operating costs;
2.Easy operation and management;
3.Microorganisms with slow growth rates can maintain high concentrations;
4.Reduce the production of excess sludge;
S-type has a high porosity and is widely used in domestic wastewater. It has a better film-forming effect on high concentration industrial wastewater and can replace traditional elastic and composite fillers; C-type has low porosity and is mainly used in artificial ecological floating islands and low concentration sewage with BOD below 50.
When Bio film type Cord is manufactured, it leaves the factory with a slightly positive charge. Placed in water, it attracts microbes, which by nature have a slightly negative charge. The structure of the Bio film type Cord also attracts the microbes.Because of this, Bio film type Cord is the choice media for microorganisms to live and grow on. The microbes adhere to the threads and perform biodegradation. This is done in a three-step process including an anaerobic step for optimum solids removal (instantaneous breakdown).
1.The vertical and horizontal spacing b (100~200mm) is set for the packing support, so the installation amount of 1m3 packing support rope type biological filler is 25~100m.
2. The rope type biological filler is fixed directly on the filler bracket with PP and PE ties. The rope type biological filler does not need to be cut, but can be attached 100~200mm along the bracket and then fixed.
3.There are two ways to set rope type biological filler in the aeration tank: split flow type, the filler is installed on one side and the other side is used for aeration. Sufficient water flow space must be reserved above and below the filler, and aeration deflector can be set when necessary; The second type is the direct type. The aeration device is directly installed under the filler and the water air mixed flow directly contacts with the biofilm and supplies oxygen.
4.Split installation spacing b: 100~150mm; Direct installation spacing b: 150~200mm.
| Package Type | Container Load Capacity | Delivery time | Quality Insurance | Payment Terms | |
| 20GP | 40GP | ||||
| Ton bag | 20m3 | 40m3 | Within 7-14 days | Chinese National Standard; Offer quality assurance as request. | T/T, L/C, Paypal, West Union |
| Plastic bag | 20m3 | 40m3 | |||
| Paper box | 20m3 | 40m3 | |||
| Wooden box | 20m3 | 40m3 | |||
Pingxiang Obbo Environmental Technology Co., Ltd is an industrial ceramic manufacturer and advanced ceramic research company, which is located in Jiangxi Pingxiang Industrial Ceramic Park - the capital of ceramic in China. Obbo environmental is specializing in manufacturing ceramic media and distributing its products over the world.
The main Industrial ceramic media we produce includes: Ceramic Honeycomb carrier, honeycomb ceramic Heat Recovery Media, Catalyst Carrier, ceramic foam filter, three way catalytic converter, as well as ceramic packings and related products. We provide customized solutions for honeycomb ceramic media and our products are widely applied in the industries of chemical, electric power, metallurgy, petroleum, electronics, electrical appliances, machinery, environmental, residential, etc.
With the team of ceramic professionals and senior consultants, Obbo environmental has made significant breakthroughs of high temperature material and high cell density honeycomb ceramics and it will keep pushing the edges.
){kind=link}