15mm 18.5mm 20mm 25mm 25.4mm 35.56mm Plastic PP Floating Hollow Ball Polyhedral Roll on Ball

• Material: Plastic
• Structure Feature: Ball
• Type: Random Packing
• Usage: Chemical Industry Product
• Effect: Improve The Wear Resistance
• Source: Particle
• Model NO.: OB-PB
• MOQ: 1cubic Meter
• Transport Package: Woven Bag
• Specification: 15, 20, 25, 25.4, 30, 35, 35.56mm
• Trademark: obbo
• Origin: China
• HS Code: 3926909090

Product Description

Product Description

1.Plastic ball packing

Plastic ball packing is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 Degree C to 150 Degree C. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.

2.Plastic frosted balls
Plastic frosted balls, also known as plastic beads, are made by injecting environmentally friendly plastic pellets into raw balls and then polishing them tightly. Their accuracy level can reach GO-G3. They have low density (less than water), low water absorption rate, high melting point in thermoplastic plastics, excellent electrical insulation, low dielectric coefficient, and high chemical resistance, such as acid, strong alkali, alcohol, many inorganic substances, salt solutions, solvents, etc Gaso-line, water, oil, grease, detergent, fruit juice, milk, etc., suitable for check valve, light load bearing, twist, pull switch, cosmetics ball, lotion ball bottle, essential oil ball bottle, etc.

Material:PP,RPP,PE,PVC,CPVC,PVDF,etc.

Product Parameters

 

Specification (mm)	Surface area (m2/m3)	Free volume (%)	Bulk density (kg/m3)	Number per m3
25*1.0	200	40	125	41500
38*1.2	150	40	121	22000
50*1.5	120	40	73	10480

   

Item	PP plastic ball  Polypropylene	POM plastic ball Delrin	PA66 Plastic ball Nylon	PTFE plastic ball Polytetrafluoro ethylene
Size	3mm-100mm	3mm-100mm	5mm-100mm	5mm-80mm
Material	Polypropylene balls	Delrin, POM balls	Nylon Balls	Te-flon Balls-PTFE
Grade	G0-G3  (±0.01-0.05mm)	G0-G3 (±0.01-0.05mm)	G0-G3  (±0.01-0.05mm)	G0-G3  (±0.01-0.05mm)
Type	Solid/Hollow	Solid	Solid	Solid
Density	Around: 0.85g/cm3	Around:1.4g/cm3	Around:1.1g/cm3	Around: 1.5g/cm3

 

Our Advantages

PP plastic ball

Applications: used for chemical packing,transfusion, level calibration indicator.

POM plastic ball

Feature:
Overall performance is good, with high strength and stiffness, good wear resistance, low water absorption, and good dimensional stability.

Applications: POM plastic balls are used for bearings, slides, sliders, sealing balls, and decorations.

PA66 plastic ball

Feature:
1. Excellent mechanical performance.
2. Excellent thermal performance with good thermal stability between 80 and 140 degrees.
3. Excellent chemical stability and oil resistance.
4. Excellent injection molding performance.
5. Various glass fiber filling contents ranging from 15% to 45%.
6. Self extinguishing and flame retardant to UL94 V-0.
7. Excellent wear resistance.
8. Relatively high water absorption rate.

Applications:Used in check valve, light load, the knob pull switch, low-cost

PTFE plastic ball

Feature:
1. Low friction coefficient, the lowest among almost all solids;
2. High temperature resistance, polytetrafluoroethylene maintains stability at temperatures up to 260 ° C;
3. Good chemical stability, almost unaffected by any chemical attack.
4. Surface viscosity, excellent electrical insulation performance, stable dielectric constant in a wide frequency range and minimum value, excellent aging resistance, non combustible, free of oxygen, ozone, and ultraviolet rays

Applications: Instruments, valves, and seals suitable for use in high and low temperature or acid-base liquid conditions, chemical treatment pumps, check valves, light load ball bearings, volumetric displacement balls for chemical baths, and many other applications.

 

Application

 

Packaging & Shipping

 

Package Type	Container Load Capacity		Delivery time	Quality Insurance	Payment Terms
	20GP	40GP
Ton bag	20m3	40m3	Within 7-14 days	Chinese National Standard; Offer quality assurance as request.	T/T, L/C, Paypal, West Union
Plastic bag	20m3	40m3
Paper box	20m3	40m3
Wooden box	20m3	40m3

Company Profile

Pingxiang Obbo Environmental Technology Co., Ltd is an industrial ceramic manufacturer and advanced ceramic research company, which is located in Jiangxi Pingxiang Industrial Ceramic Park - the capital of ceramic in China. Obbo environmental is specializing in manufacturing ceramic media and distributing its products over the world.

The main Industrial ceramic media we produce includes: Ceramic Honeycomb carrier, honeycomb ceramic Heat Recovery Media, Catalyst Carrier, ceramic foam filter, three way catalytic converter, as well as ceramic packings and related products. We provide customized solutions for honeycomb ceramic media and our products are widely applied in the industries of chemical, electric power, metallurgy, petroleum, electronics, electrical appliances, machinery, environmental, residential, etc.

With the team of ceramic professionals and senior consultants, Obbo environmental has made significant breakthroughs of high temperature material and high cell density honeycomb ceramics and it will keep pushing the edges.